HOW TO BUILD WITH PANELS
The calculations, diagrams and pictures displayed are recommendations for panel applications under normal conditions of installation.
ANALYSIS AND VERIFICATIONS MUST BE MADE BY THE PROJECT ENGINEER.

LEGEND

ENGINEERING DRAWING                                      PICTURE

                     

 

FOUNDATION to PANEL - Dowels - Rebar

2.1.1 FOUNDATION TO PANEL

2.1.2 FOUNDATION TO PANEL

2.1.3 DOWEL-REBAR TO FOUNDATION

2.1.4 DOWEL-REBAR TO 2ND FL.

2.1.5 DOWEL-REBAR TO 2ND FL.

Other Details:
  1011,   11b11c121314,   1516


PANEL INSTALLATION

PANEL to PANEL - Flat Connection

An 8" Joint Mesh is laid over the 2 edges of the panels being connected end to end and "clipped" to the panels using "Clips"

4.1.2 FLOOR PANEL SPLICE 

Picture

Other Details:
33
34

35


PANEL to PANEL - Angled Connection

A 90° Joint Mesh is laid over the interior & exterior corner edges of the panels being connected and "clipped" to the panels using "Clips".
A "corner aid" is clipped over the 90° Joint Mesh outside corner to help with cement thickness consistency

4.1.3 FLOOR PANEL SPLICE 

Picture Ext
Picture Int

PANEL to ROOF - 90° Angle Connection
A 90° Joint Mesh is laid over the interior corner edges of the panels being connected and "clipped" to the panels using "Clips".

5.1.2 ROOF EAVE

Picture1
Picture2


PANEL to ROOF - Various Angle Connection
A Joint Mesh is laid over the interior corner edges of the panels being connected and "clipped" to the panels using "Clips".

5.1.1 ROOF EAVE

5.1.3 ROOF PANEL 

5.1.4 ROOF RAKE 

 

ADDITIONAL PANEL DETAILS

3.1.1 FLOOR PANEL

3.1.2 FLOOR PANEL

3.2.1 FLOOR PANEL BEAM

3.2.2 FLOOR PANEL BEAM

3.2.3 FLOOR PANEL BEAM

3.2.4 FLOOR PANEL BEAM

3.2.5 FLOOR PANEL LINTEL

3.2.6 FLOOR PANEL BEAM STAIRS

4.1.1 FLOOR PANEL SCHEDULE

4.2.1 PANEL BOLT

4.2.2 PANEL REINFORCEMENT  

 

ELECTRICAL - PLUMBING
The polystyrene is scored (or melted) to allow for the conduit and receptacles to be installed.
Picture
Detail: 32



DOORS
Truss Strips are used as Headers and "clipped" to the panels.
Picture


WINDOWS
Truss Strips are used as Window surround and "clipped" to the panels.
Picture

Corner Aid is used on the window sill
Picture of Sill

Window frame is attached to panels with clips
Picture of Frame

CONCRETE - PLASTER
Concrete, Gunite, or Plaster is applied on both sides of the panels.
Picture